Corrosion Resistant Single Component Metal Primer PrimeLock™

(2 customer reviews)

PrimLock is a water-based, low VOC, single component, rust inhibitive acrylic primer. With a gray finish, this metal primer renders excellent water-resistance and corrosion-resistance for most metal surfaces.

Get Local Price Information Now

Clear

Description

Single Component Metal Primer PrimeLock™ 7169

Single Component Metal Primer PrimeLock™ 7169

Prime Lock Low VOC Primer is a single component acrylic with a VOC under 100 grams per liter. It is our most corrosion resistant single component primer. Excellent for exterior and interior applications in mild to moderate corrosive environments. Prime Lock passes ASTM B-117 to 1000 hours, virtually unheard of for any single component water based primer. It can be used under any of our single component topcoats. Available in Light Gray[/vc_column_text][vc_column_text]

How to Apply Single Component Acrylic Metal Primer:

Surface Preparation:
Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with BC-4000 cleaner or other suitable cleaners. Thoroughly cured old coatings or new smooth metal may require scuff sanding for maximum adhesion.
Moderate Exposure: Abrasive blast to SSPC-SP-6 commercial blast before priming.
Severe Exposures: an Abrasive blast to SSPC-SP-10 near white blast before priming.

Acrylic Metal Primer Application Temperatures: 

How to Thin Acrylic Metal Primer:
Only apply metal primer when air and surface temperatures are between 50oF and 100oF and surface temperature is at least 5oF above the dew point.

Roller or Brush Primer: Use clean water. Thinning is normally not required. Use 5%-10% if needed (approximately 1/2 pint per gallon)
Air Atomizing Praying Primer: Use clean water. Thinning is normally not required. Use 5%-10% if needed (approximately 1/2 pint per gallon)
Airless Spraying Primer: Use clean water. Thinning is normally not required. Use 5%-10% if needed (approximately 1/2 pint per gallon)

CleanUp:
Soap and water

Recommended TopCoats: Superlife 316 Low VOC, Steel Tuff 316, Topcoat 1010, Steel Plus Epoxy Topcoats

Equipment Recommended applying Metal Primer PrimeLock 7169:

Filter: Use 100 mesh stainless steel screen or nylon bag when needed
Brush: Use a quality synthetic bristle brush
Roller: Use quality roller cover
Air Atomized Sprayer:  Follow equipment manufacturer’s nozzle and needle selection recommendation for use with heavy latex paints. Spray at 45-60 psi.
Airless Sprayer: 2000-2500 psi with 0.015 to 0.019 tip.
Hot Spraying Temiture: 100-120F
PrimeLock-7169 Metal Primer VOC Information: 61.4 g/L or 0.52 Lbs/gal
7169 Metal Primer Appearance:  Flat Light Gray

*** FOR INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF CHILDREN. ***

PrimeLock 7169 Metal Acrylic Primer Ordering Information:

Product Number Size Wt./Case Case Quantity
30-7169-01 Gallon 44 4
30-7169-05 5 Gallons 58 1
30-7169-55 55 Gallons 610 1

 

PrimeLock™ 7169 Request



Name:*
E-mail:*
Phone:
-
Location:*
Application Area:*
Your Request:
Bot Check:

WEIGHT PER GALLON 11.39 Lbs
SOLIDS BY WEIGHT 56.3%
SOLIDS BY VOLUME 40.3%
RECOMMENDED DFT 2.5 mils
WFT TO ACHIEVE DFT 6.5 mils
THEORETICAL COVERAGE @1 MIL DFT 644 sq. ft./gal
ACTUAL COVERAGE AT RECOMMENDED DFT 258 sq. ft./gal
DRY TIME @77OF AND 50% HUMIDITY Tack Free: 15-30 minutes
Handle: 1-2 hour
Recoat: 4-6 hours
Full Cure: 7 days (can be accelerated)
HEAT RESISTANCE OF DRIED FILM 350oF
SHELF-LIFE 2 year
PACKAGING 1 gallon, 5 gallons, and 55-gallon drum

Additional information

Size

Gallon, 5 Gallon, 55 Gallon

2 reviews for Corrosion Resistant Single Component Metal Primer PrimeLock™

  1. admin

    gray finish, this metal primer renders excellent water-resistance and corrosion-resistance for most metal surfaces.

  2. admin

    PrimLock 7169 is a water-based, low VOC, single component, rust inhibitive acrylic primer. With a gray finish, this metal primer renders excellent water-resistance and corrosion-resistance for most metal surfaces.

Add a review

Your email address will not be published. Required fields are marked *